高伸长率冷轧双相钢DP980显微组织及性能

摘要：为了进一步提高冷轧双相钢DP980的强塑性，采用低C-Si-Mn-Nb-Cr成分，通过调整连续退火工艺参数，系统研究了工艺组织性能的关系，利用OM、SEM、EBSD分析了不同退火温度条件下各相的比例、尺寸、形貌、分布，同时利用力学拉伸试验手段研究了连退两相区退火温度对强塑性的影响。结果表明，通过优化调整连续退火工艺，不仅可以在冷轧铁素体和马氏体双相钢的组织上获得少量的残余奥氏体，也能细化再结晶晶粒，最终获得ReL/Rm≤0.5、高伸长率A50≥15%的冷轧DP980，提高强塑性的同时改善了成型性能。     

Ultrashort pulse-induced elastodynamics in polycrystalline materials. Part I: Model validation

The coupled thermal-mechanical response of a polycrystalline metallic film in response to ultrafast optical impingement is investigated. The thermo-elastodynamics formulated in the article considers laser absorption along the axial direction and thermal diffusion along the radial direction to account for the normal and shear stresses initiated by the rapid heating. The generalized formulation incorporates a two-step hyperbolic temperature model that characterizes the energy transport of electrons and lattices as finite in velocity. The coupling of thermal and mechanical fields is established through considering the energy dissipated in the form of propagating thermo-mechanical disturbances. The thermo-elastodynamical response of the polycrystalline film is found to be a strong function of the electron heat capacity that is also temperature-dependent. In addition, grain size effects due to film surface and grain-boundary scatterings are found to impact several thermophysical properties of the material. The impact of the energy transport of electrons is particularly prominent when the thickness becomes comparable with the electron mean-free-path. A staggered-grid finite difference scheme is followed to simultaneously resolve the coupled thermo-elastodynamical responses using an axisymmetric model. The time variation of the normalized electron temperature of a single crystalline gold film derived from the generalized model is favorably examined against published physical data, thus demonstrating the feasibility of the formulation in depicting the electron transport dynamics in response to non-ablating ultrafast irradiation.     

Q700D热影响粗晶区疲劳寿命与小裂纹扩展分析

摘要：为提高焊接构件的动载疲劳寿命，以热模拟为试验手段，对Q700D高强钢进行了焊接热模拟，研究了粗晶热影响区的疲劳寿命、小裂纹扩展行为以及组织软化特征。利用Paris方程和轴向拉伸疲劳试验数据，建立了ΔKth值与模拟粗晶区疲劳寿命的对应关系，利用ΔKth值实现了快速预估粗晶区疲劳寿命。研究表明：相同应力幅值下的lgN值与ΔKth值存在一定的线性拟合关系，即ΔKth值越大，则疲劳寿命N越长。小裂纹扩展微观机理在于所形成的大角度晶界（不小于15°）对小裂纹尖端的止裂性较强，可迫使小裂纹尖端转向耗能。CGHAZ的软化与第二相粒子回熔与粗化有关，粗化的第二相粒子易萌生小裂纹，可通过提高大角度晶界抑制裂纹扩展。     

基于神经网络算法的井下裂缝诊断与堵漏技术

在钻井过程中，常常钻遇不同宽度的井下地层裂缝。钻遇裂缝时容易发生钻井液漏失现象，甚至发生钻井液失返现象，严重影响了安全、高效钻井。目前裂缝封堵的方法常存在封堵成功率不高、堵漏承压能力低的问题，其中一个重要的原因是对井下地层的裂缝宽度等特征认识不清。基于地层裂缝产生的岩石力学机理，确定影响裂缝宽度关键的6个力学和工程因素，并利用神经网络计算的非线性、大数据特点建立了井下地层裂缝宽度的分析模型，模型包含输入层、输出层和3个隐藏层。通过该模型诊断井下裂缝宽度，提高了计算精度，平均误差仅为2.09%，最大误差为5.88%，解决钻井现场仅凭经验判断裂缝误差较大和依靠成像测井成本较高的问题。同时根据神经网络模型诊断得到的裂缝宽度优化堵漏材料的粒径配比，提高了裂缝内的架桥封堵强度和架桥的稳定性，封堵层的承压能力达到12.8 MPa，反向承压能力达到4.5 MPa。现场堵漏试验最高憋压10 MPa，经过封堵作业后大排量循环不漏，达到了裂缝性地层高效堵漏的目的，堵漏一次成功。      

总变差模型在书画打印宣纸印刷质量预测中的应用

为了建立适用于书画打印宣纸印刷质量的预测模型,本研究测量了14种书画打印宣纸的粗糙度、白度、不透明度、定量、光泽度和针对宣纸特别设定的帘纹深浅以及帘纹疏密度等表面物理参量,并在相同条件下,使用喷墨打印设备输出并测量印品色度值,利用总变差模型构建去除帘纹色差的测定方法,得到与人眼视觉特征相符的色差。运用GRNN广义回归神经网络结合书画打印宣纸表面物理参量与宣纸去帘纹后的色差值,建立预测模型。结果表明,该模型能够在仅测量书画打印宣纸表面物理参量的情况下,便能较为准确地预测书画打印宣纸印刷质量,为书画打印宣纸印刷前的选纸工作提供指导依据。     

悬浮法PVC树脂粒径的影响因素

讨论了悬浮法PVC树脂生产过程中影响树脂粒径的主要因素,有针对性地从聚合釜搅拌、反应配方、体系氧含量、pH值、聚合温度和转化率等方面提出了粒径的控制方案。     

某高硫铜硫矿工艺矿物学研究

研究了某高硫铜硫矿的工艺矿物学。结果表明,原矿中铜品位为2.85%,硫品位为24.32%,金含量为0.48g/t,铜、硫、金是主要回收的元素。原矿中的金属矿物有黄铜矿、黄铁矿、蓝辉铜矿。目的矿物黄铜矿和黄铁矿的嵌布粒度差异较大,且铜矿单体解离度相对较差。在选择工艺流程时应该注重氧化铜矿物的回收,同时要选择合适的磨矿细度,保证目的矿物单体解离。     

Precipitation location of secondary phase and microstructural evolution during static recrystallization of as-cast Ti-25V-15Cr-0.3Si titanium alloy

The microstructural evolution and precipitation location of the secondary phase of an as-cast Ti-25V-15Cr-0.3Si titanium alloy were investigated via isothermal compression experiments and heat treatment. The average aspect (length-to-width) ratio, average area and size of the grains at different heat treatment temperatures and holding time were analyzed and the effects of deformation and annealing time on the grain area and size were considered. It was found that the grain size was strongly influenced by the height reduction and holding time. Grain growth was significant when annealing time increased from 10 min to 2 h at 950 °C and height reduction of 30%; however, grain growth was minimal at annealing time between 2 and 4 h. Many dispersion particles were observed to form in continuous chains; the precipitation location was confirmed to be along initial grain boundaries, and the dispersion particles were identified to be Ti₅Si₃ phase by TEM.     

The control of abnormal grain growth in low-voltage SnO2 varistors by microseed addition

In this research, the addition effects of three different quantities of micron-sized seeds (microseeds) to a SnO₂ varistor prepared from nanomaterials on the microstructure and electrical properties were studied. Moreover, surge-withstanding capability of low-voltage SnO₂ varistors was investigated. The X-ray diffraction pattern disclosed a single phase SnO₂ for microseed grains. The morphological features of samples were characterized using scanning electron microscopy. The abnormal distribution of grain size with elongated grains of SnO₂ in fine grains matrix was observed in sintered samples without microseeds. The low content of microseed addition (0.3 wt%) had not controlled abnormal grain growth, however, it increased mean grain size to 37 µm. Although the high content of microseeds (7.5 wt%) stopped abnormal grain growth, it had a negative effect on relative density and mean grain size. The normal grain size distribution with maximum mean grain size (45 µm) was obtained in samples containing 1.5 wt% microseeds. These samples showed the lowest breakdown field (240 V/cm) and the highest surge-withstanding capability (1.5 kA/cm²). Furthermore, the standard deviation of the electrical parameters of these samples was improved due to normal grain-size distribution.